This can be done by pressing the orange key. Most repeater information can be found here: ġ: set the device to frequency mode. The information required to program a repeater is: Usually in US, offset is the listed repeater frequency +/-600 KHz for VHF and +/- 5MHz for UHF. The difference in the transmitting frequency and the receiving frequency is called the OFFSET. So, the repeater’s transmitting frequency is our receiving frequency and our transmitting frequency is the repeater’s receiving frequency.

A repeater is an electronic device that receives a signal on one frequency and retransmits it at a higher level or higher power, or onto the other side of an obstruction on a different frequency, so that the signal can cover longer distances. The other method to communicate with a radio is through a repeater. Most importantly, the adjustable power setting enables you to adjust it to more permissible levels.The following steps are based on the Baofeng UV-5R V2+ model, but should apply to any UV-5R series Baofeng model. Moreover, it offers ease of programming both manually and by using CHIRP to add in FRS/GMRS frequencies.

To use your HT on FRS channels, you may want to enhance the performance with an external antenna. This handheld transceiver works excellently as a walkie-talkie, all thanks to its removable antenna. Many operators keep a UV-5R unit in their stash for multiple reasons. To program frequencies manually, set your transceiver to frequency mode by pressing the orange mode button on your unit.Enter these frequencies in your transceiver by using the programming software CHIRP.Make sure the frequency you’re choosing is FRS and not GMRS.If you’re unable to enter the exact frequency, use the up/down arrows to test until you hit the strongest signal. You can also find a complete cheat code here (). Find frequencies for FRS channels on Google.Set the power to low so that you’re not breaking any laws when using BaoFeng UV-5R on these frequencies. Search for the transmit power (TRX) option in the menu.

Manually program uv 5r